Informative

A Secret Way to Improve Your Homes Value!

Are you wanting to improve your home’s curb appeal for selling? Or wanting to increase your historic home’s value? Regardless of your reason, we all know there are quite a few ways to get your property to really shine. However, there is one thing that often gets left behind. We are talking about our "EverStorm" Storm Window!

Now you maybe asking if an aluminum storm window will raise my early 1900's home value? They may be energy efficient and be protecting a historic window but it really doesn't do much for the home. It's not aesthetically pleasing. If you are wanting to improve your home’s value, an aluminum storm window will not do the trick.

An EverStorm window is a traditional storm window that is a very practical and a cost effective way to improve your old home value. They improve the comfort and privacy of the home without replacing a single window. They will also reduce the transfer of heat from the outside into your home. 

Another great thing about having an EverStorm protecting your primary, antique sash is the amount of maintenance required will decrease. The way it is designed, this type of storm window will preserve your old home. You won't find yourself needing to repaint or restore your vintage windows underneath! It will protect the old wood window from all of the elements! 

Keep in mind, storm windows have been around for a hundred years and are often just a 1 over 1 design. Our EverStorm is made with Accoya wood and is the perfect storm window to protect a historic home and reduce cold drafts. These EverStorms are available through any of the Wood Window Rescue locations or can be shipped nationwide!

Have questions? Leave a comment for us below!

How to Replace a Window Pane  

Replacing a broken window pane is one of the most common window repairs done on an older home. As you may already know, it’s due to how fragile glass can be. It is a real pain to take down the entire window too for just one piece of glass. But, what if we told you there was a simpler way? 

Did you know that there is a way to replace a pane without removing the window? If you answered no, allow us to show you how!

To start, you’ll want to get your measurements! We recommend using the FastCap Measuring Tape for this type of RIY. To get accurate measurements for your new pane of glass, you’ll want to measure the opening by starting and ending at the wood and glazing meets. As always, make sure to measure twice!

Next, you’ll want to remove the old glazing or silicone with a 3/8" Chisel at the seam. It may give some resistance, but will eventually all come off.

Once all of the glazing has been removed, you’ll need to adjust your measurements for the glass instead of the opening. To do so, you’ll take your measurements from earlier and reduce them by 1/8” and not the 1/16” shown in the video. So if you had the exact same measurements in the video, the opening being 32” x 20 1/8”, you’ll end up with 31 7/8” x 20” for your glass measurements. Just make sure to measure twice and only cut once! We highly encourage that you test fit the glass before proceeding into the next step. If you aren’t comfortable with cutting the glass yourself, the replacement piece of glass can be cut at your local home center.

Sarco Type M Multi-Glaze
from $25.00
Quantity:
Quantity:
Add To Cart

Now, you’ll want to make sure the glass bed is cleared of any remaining debris with the 3/8” Chisel, then you will be glazing the back bedding to prepare for the pane. We use the professional Sarco Type M Multi-Glaze putty for all glazing we do and can be purchased from our online shop! The putty will help create a long-term seal. To smooth out, we use Lamson 3/4" Bent Knife which can also be purchased from our online shop! After the back bedding is all glazed, you can set your glass in the opening and pin the glass. To ease the process of pinning, we have used CRL Diamond point Driver #1 Points. You can use the Red Devil 1710 Glazing Push Points as well! Once it’s pinned, you can finish up by glazing the window!

In the event that you are replacing a pane that isn’t ground level, we recommend using the Little Giant Ladder and get the Ladder Stabilizer to prevent falls. Be safe and cautious if you are working on a second floor.

If you desire to take down the window instead, here is a video of Tom Silva from This Old Home replacing a broken pane in a basement window to get you on the right track. This video also shows how to cut the glass for your window!

If you happen to come across a different old window problem and want some advice, check out our Common Window Problems Blog. We have identified 5 common issues you can find on your wood windows and provide solutions to each issue! You can also email us at info@woodwindowrescue.com or leave a comment below for more information!

Have any questions? Leave us a comment below! 

How to Paint a Window: 5 Pro Secrets for Success

Your wood windows have been primed with a coat of oil-based primer. They have been glazed for a few days...this allows them to skin over. 

The next step in this process is to paint the sashes! Painting any wood surface can be a daunting task and windows are no exception! Do not fear RIYer’s...there are some secrets that professionals use that can make painting a sash a breeze!

When it comes to painting a window sash, there are 5 pro secrets we highly recommend following for success! 

Pro Secret #1: Ensure the sash is prepped for painting! After the sash has been primed and the glazing has skinned over, wipe down for any debris that may have been left behind.

Pro Secret #2: Do not apply just one coat of paint! Apply two coats on the interior and the exterior! Avoid painting any sides that the jamb will rest against and avoid excessive amounts of paint during the application to areas that would cause the window to stick.

Pro Secret #3: Start with lites, rails and stiles of the sash! Follow video provided above on how to paint the lites and make sure to leave a 1/16” lap onto the glass. If you are unsure which part is which, check out our Double Hung Window Blog that goes over the anatomy of a double hung window.

Pro Secret #4: Dripping paint? Clean up drips and over painted areas immediately with a wet rag.

Pro Secret #5: Once paint has dried, cut back interior paint from glass with a scraper to profile and cut back exterior paint from glass with a mini paint scraper to leave the 1/16” lap onto the glass.

Using these 5 Pro Secrets can help any RIYer paint a wooden sash beautifully! 

Have questions? Leave us a comment below!

Easy Window Lock Fix

Do you have a double-hung window who’s upper sash is sagging? Is that upper sash sagging so badly that the lock doesn’t line up with it’s catch anymore?

You may be wondering how this happened. It could have occurred on a larger wood window where the glass was heavy enough to cause the upper sash to sag overtime. Another reason this may have occurred...the window was painted open from an improper painting job. Either way, this has caused the alignment to be thrown off and has made the windows unsecured. 

There are a couple of ways you can approach this common issue of unaligned sash locks! The first thing that may come to mind...renovate the window. Renovating the window to make the meeting rail align will fix this problem along with assisting in the reduction of air infiltration, allow the window to shut correctly and make the home a bit more energy efficient. Renovating is a great option, but if you just want to secure the home...we have another RIY route you can take!

Allow us to introduce the Sash Lock Shim! A sash lock shim is an inexpensive way to align the lock on a vintage window. This is extremely easy to install yourself and a great way to protect the home. This fix is a 5&5, which is $5 in materials and will take 5 minutes of your time to fix!

As shown in the video, you'll need a few more tools and items than just the shim itself. You'll need a screwdriver or a Leatherman. You may also need longer screws due to the height distance. We do not recommend using a drill or any other power tools for this RIY project. Using a drill can cause the aged wood to crack and split...using a hand tool will not.

If you are having difficulties with the screw catching, try using a toothpick in the gap! Breaking off a toothpick that has been wedged in the gap can help the screw catch! 


Wood Window Lock Shim
from $6.99
Size:
Quantity:
Add To Cart

You can order these Sash Lock Shims at our online store by clicking this link! If you happen to come across a different old window problem and want some advice, check out our Common Window Problems Blog. We have identified 5 common issues you can find on your wood windows and provide solutions to each issue! You can also email us at info@woodwindowrescue.com or leave a comment below for more information!


Have any questions? Leave us a comment below!  Searching for something else? Try searching our blogs!

Rescue Power Tools

While restoring an older home onsite, it’s imperative to have the proper tools! Not knowing which tool will best help you or what it can do for your vintage windows can cause a lot of headaches too. That’s why we’d like to share this information with you and go over the different power tools we use for rescuing wood windows in a historic home!

 

Listed below are all the tools mentioned in the video. We recommend getting as many of the tools as possible from your local hardware store. This helps support local businesses and some may repair the tools themselves, which ultimately prevents wasted tools.

 

There you have it...all the power tools, plus a few others, that we use daily for any onsite project. Now, if you are wondering about regular hand tools that we use, see our Wood Window Repair Tools Blog and Video! That blog and video provide a very helpful list of all the hand tools we use to restore an antique wood window at our shop. 

 

Have any questions? Leave us a comment below!  Searching for something else? Try searching our blogs!

Common Window Problems

It’s very common for an older, wood window to start having issues as it ages. From the wear and tear throughout the years, along with being beat down by the elements, there are quite a few problems that can form on any vintage window.  

Some of the typical problems you may run across could be: wood rot, lead paint, windows are inoperable and even air infiltration issues. Great News! All of these issues are manageable! 

If you aren’t sure what all is ailing your wood windows, we’ve created this wonderful guide below to help you understand and identify the windows problems you may be facing. We have mastered multiple products and services that can solve all of the listed window problems and more! If you do not see the window problem you're facing, please leave us a comment!

Air Infiltration

Air infiltration, more commonly known as drafty windows, is the MOST FREQUENT old window problem out there! These drafts can be quite a nuisance as they let the cold air of winter into a room and cause it to be very uncomfortable. You can often notice the breeze from several feet away too. This is not the only discomfort you’ll come across with a drafty, antique window. You’ll easily find other discomforts, such as allergens and insects entering your home! Another draft problem you may notice is dirt and grime on the windows and surrounding fixtures. Now this may be happening because the window could be stuck in the open position or there is no weatherstripping on your window.

What is our solution for this? Well, we recommend installing weatherstripping for the easiest solution, but a storm window has been the best practice for over 100 years!

Lead Paint

Lead paint is harmless...that is, until it’s disturbed. Once lead paint is disrupted, it becomes extremely harmful to children, pets and yourself! While loose, as a dust or chips, it can damage the nervous system of children. By law, it is required that any contractor doing work on the home MUST follow the RRP rules from the EPA or State Agency. Keep in mind, lead was the primary type of paint at the turn of the century and was used until 1978. You also need to be aware that while doing any type of restoration, licensed contractors may create lead dust that can poison all that happen to come in contact. To learn a bit more about lead paint, click this link on the reasons you need a lead safe contractor! 

What is our solution to this? We have a threefold solution. First, we educate our neighbors to the risks of lead paint and we require our repairman to go through the required RRP training. Second, we eliminate all significant paint failure that should be removed from the property. This can include the sash, trim and moldings. Third, we encapsulate by using an encapsulating paint and primer to stop the chipping of the paint.

Outside Noise and Lack of Privacy

We fully understand that the noise from the outside can disrupt the peace in your home. Cars driving by, the trash truck early in the morning, or even fire truck sirens. It can give you the sense that you lack privacy. That you can hear your neighbors and they can hear you. This is simply caused by wood windows that are single pane that do not block out sound. 

What is our solution to this? Storm windows are the best solution and actually work better than a replacement window. The storm windows add an additional layer! That means there is an additional space between the outside layer and the inside layer. Sound can also be blocked out by drapes and window treatments!

Rot and Deterioration

When a wood window starts to deteriorate, they can lose their original beauty. In the last 40 years, tradesmen have gone from craftsmen who were well rounded in all the trades and able to maintain homes to replacement installers. These replacement contractors are skilled in covering up the differing maintenance down the line until the only option that remains is a replacement…or RESCUE!

What is our solution to this? Fix the problem first! Then do normal, annual maintenance. Limit maintenance on historic windows by protecting them with a storm window to shield them from the elements. 

Stuck

We hear about windows being stuck all the time. Chances are, the window has been painted shut! This can be inconvenient in the Spring when you want to enjoy a nice breeze and extremely unsafe in the event of an emergency, such as a fire.

What is our solution to this? Free up old window with simple hand tools. Remember to make sure at least one window in each bedroom works for safety. If you want to go a step further, do a full mechanical and repair the ropes and pulleys too!

Have any questions? Leave us a comment below!  Searching for something else? Try searching our blogs!

3 Tips to Hang the Sash

“How do you repair an old, historic window to it’s original glory?”

“My wood windows won’t open, how do I fix this?“

“Do I have to replace my vintage window?”  

These are just some of the great questions we often hear from our neighbors and we want to share some of our pro secrets with you. Allow us to introduce you to the Mechanical Rescue. A wonderful, restoration system we use to make an antique window open and close once again! We teach each one of our Repairmen to use this system while restoring windows built before 1950. Single or double hung...vintage wood windows can be rescued!



This video will show you how to install new ropes onto weights without removing the casing. This process works great on your window restoration projects and creating an EverSash replica. To get you on the right track, here are 3 pro secret tools we use to ensure a successful Mechanical Rescue on any wood window!

Pro Secret #1: #8 Samson Spot Cords – A cotton sash cord that has a nylon core that adds strength and reduces stretch. Also, it’s coating provides chemical, weather and heat resistance. The Samson Spot cord is perfect for a historic window!

Pro Secret #2: Rescue Mouse – The Rescue Mouse is weighted down piece of sash chain that is taped onto the window’s sash cord. This is used to prevent a window sash cord from snagging on anything in the weight pocket or the pulley. This can be exceptionally useful to speeding up the process of restoration for your wood windows!

Pro Secret #3: HEPA Vacuum – HEPA (High-Efficiency Particulate Air) vacuums are a standard tool used at Wood Window Rescue. They are capable of trapping extremely small particles, such a lead dust, while we are scraping paint off of old windows. Attach a pro scraper and you’ll be on your way to removing years of lead paint. A HEPA Vac will help protect your family, pets and yourself from lead exposure. An absolute must to any restoration project on a vintage window sash.

By using all three of our Pro Secrets, you’ll be on your way to restoring your antique windows in no time! 

To see more tools that we use to make EverSash replicas, click this link to look into our Repair Tools blog. 



Have any questions? Leave us a comment below!  Searching for something else? Try searching our blogs!

The Double Hung Window

The double hung window, we love this window! Throughout the US this is the window in most old homes, before 1950 this window made up a large part of any exterior. It was an important part of America’s ever growing neighborhoods. You can find this in every type of  vintage old home. Today at Wood Window Rescue the double hung sash window is our primary focus of our window repair and restoration business. Our sales and service partners along with our repairmen spend weeks learning about how the double hung window works, how to repair it and how it can outperform any modern window system. Every trainee begins with the basics, the anatomy of the double hung window. Below is the walkthrough of a double hung window by me, a link to the anatomy of the double hung window and a glossary of common wood window  terms.

Get a Copy of Our Diagram of a Double Hung Window!

GLOSSARY

DOUBLE HUNG WINDOW- A wood window with two vertically sliding sash separated by a parting bead or stop providing separate tracks for the operation of the sash and in which both sash operate.

SASH- Sash is a framed piece of glass that includes two stiles and two rails. The Sashes may be fixed or hung, operational.

JAMB- The structural window frame that holds the sash. The jamb includes the header, jamb leg and sill.

MECHANICAL- The system the window uses to open and close, this includes hardware and balance type.

SASH TERMS

MEETING RAIL- The horizontal member of a single hung or double hung top or bottom window sash that meets or aligns with its mate when the window is in the closed position.

RAIL- The outside vertical member of a window sash.

STILE- The vertical piece of a sash frame. This is where the balance system is connected on a double hung sash window.

EVERSASH- The reproduction sash made by Wood Window Rescue. The ever sash is designed to match most windows built between 1880 and 1950. The wood window is built using Accoya, the highest grade longest lasting wood available in the world. The EverSash is available though out the nation by contacting Wood Window Rescue.

MUNTIN- A light bar dividing two panes of glass in the field of a sash to form individual lights.

LITE- A pane of glass; also, an opening in a sash for receiving a pane of glass.

GLAZING- The lites/glass are sealed in place using glazing putty. Trade professionals only use high quality oil based glazing like Sarco Type M.

Sarco Type M Multi-Glaze
from $25.00
Quantity:
Quantity:
Add To Cart

JAMB TERMS

JAMB LEG- The side jamb of a double hung window in which the pulleys are mortised and installed.

JAMB HEAD- The uppermost horizontal member of the window frame, fitting between the side jambs or pulley stiles.

SILL- The horizontal member at the bottom of the window frame upon which the lower sash rests when closed.

SUB SILL- In a window frame with two-piece sill construction, it is the lower member beneath the sill.

BLIND STOP- The wood stop on the outside edge of the wood window jamb just behind the exterior casing against which the shutter, blind, or screen rests. If also serves to guide and retain the top sash in a hung window.

PARTING BEAD- The narrow wood strip separating the sash in a check rail window.

INTERIOR STOP- Molded wood strip that holds the lower sash in and ties the jamb leg to the casing.

WEIGHT POCKET- The small removable door cut into the pulley stile of a weight-and-pulley counterbalanced hung window to allow access for repairing broken sash cords or chains. The lower end of the weight pocket is located about six inches above the sill.

DRAFTSTOP- Wood Window Rescue’s exclusive weather-stripping system that integrates high performance pile weather-stripping with traditional wood window moldings like interior stop and parting bead.

MECHANICAL PARTS

SASH CORD- Small diameter rope used to counter balance the double hung sash window.

PULLEY- The pulley (wheel) over which the sash cord or chain is routed for counter balancing a hung window sash with weights with weights located in the jamb leg.

MECHANICAL RESCUE- The flagship Wood Window Rescue service. This service restores the window and sash to working order.

SASH LOCK- A locking mechanism for a wood window used to secure a sash in the close position.

Wood Window Lock
from $14.99
Finish/Pack Size:
Quantity:
Add To Cart

SASH LIFT- A handle or recessed finger grip used to provide leverage to open a sash window.

Wood Window Lift
from $11.99
Finish:
Quantity:
Add To Cart

BONUS TERMS

CASING- Trim work that surrounds a window that ties the window into the interior and exterior walls.

MULLION- On a window frame, the casing that joins two frames together as in making up a twin, triple, or other multiple window unit.

STOOL- The horizontal interior trim member at the base of the wood window that sits on top of the window sill, projecting into the room forming a shelf which is the termination point for the interior casing and window stop and provides a lip for the lower sash to seal against when closed.

APRON- The horizontal interior trim member beneath the window stool.

DRIP CAP- A beveled molding applied to the top of the head casing of a window or door frame and extending horizontally beyond the face of the casing, normally having a drip edge on the underside, its purpose to shed water away from the face of the casing and window.

WEATHER STRIPPING: A material around the perimeter of a window designed to reduce air infiltration. Usually  metal or composite.

UNIT: A complete wood window including sash, jamb and sill.

SASH SET: Sash for a double hung window.

OPEN SASH: Sash shipped from Wood Window Rescue with no glass installed.

KNOCK DOWN SASH- A Sash shipped from Wood Window Rescue unassembled without glass.

Have any questions? Leave us a comment below!  Searching for something else? Try searching our blogs!